THE SYSTEM

Rated 5.00 out of 5 based on 5 customer ratings
(5 customer reviews)

$25.00

9 in stock

SKU: 100-0001 Category:

Description

THE SYSTEM includes everything you need to secure your fender like Fort Knox. Once installed you can easily take your fender off without tools. Ultra secure and quick on/off – it’s like a hardtop convertible for your board! Welcome to THE SYSTEM!

Compatible with both FM and Craft&Ride fenders.

Benefits:

  • Got FlightFins? Great! No zip ties needed brah!
  • Never strip your rails, guaranteed.
  • Rails already stripped? No worries – install THE SYSTEM and forget the rail threads.
  • Quickly remove/install your fender anytime without tools.

Included (4 of everything):

  • Specially selected screws and nuts
  • Custom nut spacers
  • Custom weatherproof nut and screw covers
  • SEND Stones (to lock your fender in place)

Questions? Check the FAQ or use the contact link at the top of the page.

Required Installation Tools: 5/16″ wrench, 1/8″ and 1/4″ hex keys, small Phillips screwdriver

Installation Instructions

Additional information

Weight 1.3 oz
Dimensions 5 × 3 × 0.5 in

5 reviews for THE SYSTEM

  1. Rated 5 out of 5

    Chris Richardson

    So I tested this mounting system thoroughly. I mean, REALLY thoroughly. Big airs, drops, launching off of a kicker ramp, grabs, riding rough mountain bike trails, you name it. This system performed flawlessly.
    I was worried about the abuse the soft aluminum rail threads were taking from the regular screws for fenders. A lot of people have had their threads stripped out even with regular fender use, without using FlightFins, and I knew the FlightFins would cause a lot more stress on the rails. This setup mounts from underneath, so there is no way to strip out the rail threads. It also allows you to check the tightness of your bolts instantly, without tools. Just twist them with your hands to make sure they are hand tight.
    Installation wasn’t bad, it was a lot easier than I thought it would be. The instructions were very thorough and easy to follow. You just remove one rail, install the screws, put it back, then remove the other rail and repeat. It took probably less than half an hour, taking my time to do it right.
    No question, this is the only setup I would consider using for FlightFins, and I would probably use this even if I was just using a regular fender. This system makes it easy to remove your fender for cleaning and checking your FlightFin mounting screws.

  2. Rated 5 out of 5

    Joshua Phelan (verified owner)

    Absolutely love The System!
    I do a lot of trail riding and I love being able to take the the fender off quickly, but without magnetic mounts.
    Installation process is easy enough. The “stones” look great and blend flawlessly with the fender.
    Great product!

  3. Rated 5 out of 5

    @floatonwv (verified owner)

    I couldn’t wait for this to become available as I had already stripped my rails. The install was a bit of work in my case due to my screwholes being stripped, but I’m glad I did it. Now, I’ve got much more confidence in using my FlightFins. Not to mention the ease and convenience in just swapping out my fender for a quick cleaning or to go au natural with a few turns of the custom “stones”. This truly is a great SYSTEM!!!!
    Mad props to Dustin for thinking outside the box and executing an innovative product to enhance the stoke of our beloved Onewheel! 🤙🏼

  4. Rated 5 out of 5

    Jamie Trusheim (verified owner)

    This system is amazing. Finally a Solution to stripped rails and no more zip ties. Both my + and XR have stripped rails after jumping with fins and zip ties breaking mid trail. The system not only eliminates the need for zip ties but makes switching fenders a quick tool free process! Highly reccomend!

  5. Rated 5 out of 5

    Shane Headley (verified owner)

    Bought the send kit to use with my craft & Ride fender and flight fins setup. The most difficult part of the installation was the removal of the rail, especially if you have never done it before. However, the rails removal allow for a better understanding of the way in which components are put together on the OW. As for Dustin, I have to commend him on how he provides good customer service. He is very willing to resolve any order issues and the communication time is awesome. Overall, I will conclude that the send kit fits perfectly and it is a solid kit to have on the board.

Add a review

Your email address will not be published. Required fields are marked *